RM Type Couplings

Yawan samfur:

ANSI/DIN:(RM)

Samfurin girman inch (Aika zuwa kasuwar ANSI)

Samfurin girman awo (Aika zuwa kasuwar DIN)

ZAZA

Bayanin
Paramita
Bayanin gaba

Bayanin

Kalin RM Type suna kalin rigida ake yanzu daidai wata shafa. Wani masu fahimta suka yi amfani da cikakken rubutun da ke daidai, amma an baya sabon amfani. Wannan kalinsa ya kamata amfani daga wannan hanyar wanda mutum na fitarwa ya kamata amfani daga wannan hanyar wanda mutum na fitarwa ya kamata amfani daga wannan hanyar wanda mutum na fitarwa.

Binciken tunani, Kalin RM Type za'a iya tambayyoyi da tsarin fitarwa Q6.3 don wannan lokaci da sabon fitarwa ya samu nufin daidai.

Don haka, Kalin RM Type suna kan zuciya mai sauka daidai wata shafa, suka yi amfani da cikakken rubutun da ke daidai, amma an baya sabon amfani.

Paramita

rANGIYA MASUKE

Maidanbunka	Nau'in Jerin	Girman Rage
ANSI/DIN	RM	RM12-RM60

Kunshi Taper Bore RM Type

Katologu	Bush	Mahimman girma								Bore		Bolts		Max Torque (Nm)	Max Revolution n(rpm)	G (kg)
Katologu	Bush	A	B	C	D	E	F	H	L	mm	jima'a	Sainin	KAM	Max Torque (Nm)	Max Revolution n(rpm)	G (kg)
RM12	1210	118	76	83	102	25.4	35	6.2	57	11	32	M10	4	130	4000	3.5
RM16	1615	127	83	90	105	38.1	43	6.8	83	14	42	M10	6	220	4000	4.5
RM25	2517	178	127	123	149	44.5	51	8	97	20	60	M12	8	500	3800	11
RM30	3030	216	152	146	184	76.2	65	6.6	159	25	75	M16	8	1000	3150	23
RM35	3535	248	178	178	213	89	75	7	185	35	90	M20	8	1400	2800	38
RM40	4040	298	216	210	257	101.6	76	6.8	210	40	100	M20	8	2700	2250	64
RM45	4545	330	241	230	286	114.3	86	6.4	235	55	110	M24	8	3200	2100	88
RM50	5050	362	267	268	314	127	90	6	260	60	125	M24	8	4000	2000	155

BTL Taper bushing

Katologu	Bush	Bore		Tsaki							Torque (In-Lb)	Max (RPm)	wt lbs
Katologu	Bush	MIN	Jima'a	A	B	C	D	E	J	K	Torque (In-Lb)	Max (RPm)	wt lbs
RM12	1210	1/2	11/4	45/8	21/4	3	1	1/4	0.65	1 .00	1150	4980	7.7
RM16	1615	1/2	111/16	5	31/4	31/4	11/2	1/4	0.81	1.06	1947	4000	9.9
RM25	2517	1/2	211/16	7	37/8	5	13/4	1/4	1.00	1.63	4425	3545	24.2
RM30	3030	13/16	31/4	81/2	61/4	6	3	1/4	1.19	2.06	8850	2920	50.7
RM35	3535	13/16	315/16	93/4	71/4	7	31/2	1/4	1.31	2.69	12390	2545	83.8
RM40	4040	17/16	47/16	113/4	81/4	81/2	4	1/4	1.63	3.33	23895	2115	141.1
RM45	4545	115/16	415/16	13	91/4	91/2	41/2	1/4	1.94	4.05	28320	1910	194
RM50	5050	27/16	5	141/4	101/4	101/2	5	1/4	1.94	4.05	35400	1910	341.7
RM60	6050	47/16	6	20	103/4	16	5	3/4	1.63	4.35	254000	1240	526